Skip to content
• World-First 3D Mapping & Smart Navigation -- Scans your pool on the first run and then charts the most efficient cleaning path every time.
• Auto Docking, Charging & Self-Cleaning -- Returns to its dock when low on battery or after completing a cycle, recharges, and empties debris into a shore-based bin – reducing maintenance to around once a month.
• Industry-First AI Detection & Targeted Cleaning -- Equipped with an advanced vision system that identifies debris with precision and performs AI-guided cleaning based on your pool’s map, delivering significantly higher cleaning efficiency in AI VISION Mode (Floor Only).
• Real-Time Positioning & App Control --...
20X Working Efficiency
Map-guided AI detects debris and plans the optimal path, achieving up to 20× faster, precise cleaning with minimal effort
Truly hands-free
Take full control of your cleaning with your smartphone. Navigate the robot underwater, on walls, and up stairs for fast, precise cleaning with minimal effort.
Deeper Clean
Three filtration options for different cleaning needs. Use the 380μm filter for heavy debris and pool opening to help prevent blockage and protect the system.
The 180μm filter is ideal for daily cleaning, while the 10μm ultra-fine filter works with it to capture finer particles.
World’s First
Automatically cleans, empties debris, and returns to the dock—up to 30 days of hassle-free cleaning under typical conditions.
*Do not open the dirt collector during the self-cleaning process.
x1
x1
x1
x1
x1
x1
x1
x1
x1
x1
x2
A: With direct solar charging, three full days of sunlight can provide approximately
2.5 hours of runtime.
A: Rest assured that we test every unit underwater before packaging to ensure it works properly before delivery. Therefore, it is normal for the machine to be slightly damp or have water stains.
A: We strongly recommend updating both the robot and dock to the latest firmware. We continuously optimize the user experience, and updating to the latest version will ensure optimal performance.
Best solution:
1. Check the current version in "About Device" in the APP
2. Enable automatic updates in the APP
3.Remove the robot from water and charge it using the AC adapter. Ensure the charging location has WiFi coverage (must match the WiFi information configured on the dock). During charging, the robot will automatically check and update firmware, taking approximately 30 minutes for the entire process.
A: For heavily soiled pools (such as the first cleaning in spring), relying on the solar-powered dock to charge the robot may not provide enough energy for frequent cleaning. In these cases, use the AC adapter to charge the robot.
For routine maintenance, adjust the scheduled cleaning intervals based on how much sunlight reaches your dock. If your dock's location receives limited sunlight, schedule cleanings every 2 days or less frequently.
A: We currently recommend pools up to 15 meters in length. If the water quality is poor, we advise temporarily avoiding the use of the ultra-fine secondary filter.
A: When the dock's battery is above 70%, it charges the robot. When the dock dropsbelow 50%, it pauses robot charging to preserve its own power.
If using solar charging only, we recommend activating the vision mode daily for
best results.
A: For optimal performance, clean the debris box and debris bag weekly. Clean theinternal filter basket every two weeks to avoid buildup and odors.
A: Please refer to the page below.
Dock Installation
