How to Open Your Pool Like a Pro in 7 Simple Steps (Save Time & Money This Season)

How to Open Your Pool Like a Pro in 7 Simple Steps (Save Time & Money This Season)

4/20/25·3 min read

Discover expert tips to open your pool safely, prevent algae, and keep water crystal clearplus the secret weapon for hassle-free maintenance! 

Why Timing Your Pool Opening Matters

Key Takeaway: Open your pool when daytime temps hit 70°F (21°C) to stay ahead of algae blooms.

Pro Tip: In hot climates, monitor weather closely to avoid early algae growth.

 

Step 1: Test & Balance Your Pool Water Like a Pro

a) Visual Check: Look for cloudiness, debris, or discoloration.

b) Chemical Testing: Use strips to measure:

c) Chlorine levels should be between 1 and 3 ppm.

d) pH (7.2-7.8, ideal 7.4)

e) Alkalinity (80-120 ppm)

f) Bonus: Test for metals (copper/iron) before adding chlorine.

 

Step 2: Inspect & Maintain Pool Equipment

a) Pump Check: Look for leaks, cracks, or unusual noises.

b) Filter Maintenance:

c) DE/Cartridge Filters: Clean internal components, lubricate O-rings.

d) Sand Filters: Backwash until water runs clear.

 

Step 3: The Algae Prevention Playbook

a) Attack Early: Sanitize before water temps hit 50°F (10°C).

b) Triple Defense:

i.Brush walls/floor to dislodge algae spores.

ii.Shock treat with chlorine.

iii.Run pump 8-12 hours daily.

 

Step 4: Deep Clean Like a Pro (Without Breaking a Sweat)

Manual Cleaning Checklist:

a) Skim surface debris.

b) Brush walls/floor.

c) Vacuum settled dirt.

 

Meet Your New Best Friend: The WYBOT Robotic Cleaner

 

Why WYBOT?

a) Cleans walls, floors, and waterline.

b) Reaches tight corners (no more missed spots!).

c) Saves 5+ hours/month vs. manual cleaning.

 

WYBOT BESTSELLERS:

NO.1 - WYBOT S2
NO.2 - WYBOT C1
NO.3 - WYBOT C2

 

Step 5: Final Chemical Balancing

a) Adjust pH First: Use soda ash or muriatic acid.

b) Shock Treatment: Add granular chlorine after brushing.

c) Test Again: Ensure levels are safe before swimming.

 

Step 6: Keep it Going & Watch What Happens.

Getting Started Checklist:

a) Prime pump, check for leaks.

b) Run filter for 24 hours post-opening.

 

Why WYBOT Pays for Itself in 3 Months

Cost Savings:

1. Extends filter life by 20%.

2. Achieve a 30% reduction in chemical usage.

3. No more expensive deep cleaning sessions needed.

 

Shop WYBOT Now Enjoy €20 Off & Free Gifts on Your Order during SPRING SALE!

 

https://www.eu.wybotpool.com/pages/spring-sale

Ready to Open Your Pool Like a Pro?

Dont let algae or equipment issues ruin your summer. Check out our 7-step guide to see how the WYBOT Robotic Pool Cleaner can change the way you take care of your pool!

ARTICOLI CORRELATI